For Sale
From Wiki
On this page you will find car and accessories for sale from some of our members.
Please note that The National Steam Car Association hold no responsibility for the accuracy or valuation of any item. Descriptions are exactly as members submit and it is the buyers duty to ensure that items are as described. In all cases we strongly recommend viewing of cars and items before purchase.
Advertising on this page is free for all members. - For details on how to place a listing on this page please see the bottom of this page.
PLUS - new wanted section...
Contents |
News, Sales and other Auctions
Ebay - Items for sale
The unusual steam motorcycle is back up on the US ebay site
There is a 'Stanley Steamer Pilot tank' listed
Cars for Sale
Grout Steam Car - 10hp Roadster 1903
$95,000.00
For details please contact:
R. Collins, tel: (413)256-8001 after 3 pm USA time.
Locomobile #768, Style #2 1900
$65.000.00
For details please contact:
R. Collins, tel: (413)256-8001 after 3 pm USA time.
Stanley Model CX 1904
All Stanley with the exception of the Ottoway stylestainless steel burner, stainless steel superheater and visible boiler levelglass mounted on the side of the body.
Mint original upholstery still inplace on the folding front seat. A very nice appearing dark green withyellow chassis car with all white tires. A recent engine block rebore of the3 X 4 engine with new pistons and rings fitted.
Beautiful brass side lamps,copper engine covers and detail nickel plating as original.
Click on picture for larger image
$85,000
Mike May,
Michigan, U.S.A.,
e-mail: mkmay@alldial.net
Stanley Model 750 1924
1924 Stanley Steamer, Model 750, 7-Passenger Touring Car, with a beautiful California Top.
Very good condition. Good tyres.
This car toured in 2006 and 2007 before its former owner lost his steam!
It has a propane pilot and a new fuel tank (as well as the original tank).
The leather interior has held up very well but needs some work.
This car was restored in the 1960s and has held up remarkably well, in part because it spent a lot of time in an Idaho Museum. Very well taken care of. You can be touring in this car within a day or two.
This is apparently serial number 72 of about 102 cars made in 1924 by the Steam Vehicle Corporation of America, the successors to the Stanley Motor Carriage Co. that went bankrupt in 1923.
This is a major upgrade from the Model 740 and is arguably the best condensing Stanley ever made.
Lots of photos at link stanleysteameronline.com
$74,900
Might consider a serious offer slightly below that as we have four and ½ Stanleys in a three car garage (plus Vintage Steam Products machinery!). We are desperate for space.
Feel free to call Don Hoke at (972) 661-9672 (Phone) or (972) 955-7614 (Cell).
email: donhoke@tx.rr.com
Stanley Model M 1908
According to Kit Foster's Stanley Steamer Book the Model M was produced between 1908 and 1909. Stanley's only produced 75 of them, and describe them as large touring cars of 5 seats with a 30 HP engine. 114" wheelbase with gearing of 60:60 and tyre size 36" x 4". They are described as the epitome of the coffin nosed Stanleys.
This Stanley was built over three years by the well known Goold firm in Camerton UK.
The 30HP engine is of their own improved design, considerably stronger than the original and installed in a superb copper case with original features, cylinder drains, sump plug, and oil filler.
The Bourdon Boiler steams well and the pressure gauge rarely drops below 600 psi. no matter how hard the car is driven.
Water tank holds enough for over 50 miles and fuel tank for well over 100 miles.
The only non original departure is the gas pilot and sparker which makes for easy start up and reliability. Two gas bottles are carried on the running board in a black tool box.
Rushmore headlights are acetylene with carbide generator, side lights are oil and rear lamps are electric.
The bodywork, buttoned leather seats and paintwork are all to the highest standard.
Full set of hydraulic, hot and cold steam certificates just tested by A Reen.
The car is in regular use and can be seen and demonstrated by arrangement. Pictures do not show full hood and irons which are in new condition.
For video of this car click here
Price £174,500.
For further information, Please Contact
Mr Bryan Richmond-Dodd.
London.
Phone 020 7581 8422 (9-5.30 weekdays)
Enquiries by e-mail to bryanrd@hotmail.com
Items for Sale
Dietz Brass Headlight
For more details please contact:
Julian Taylor.
Fordgate Bridgwater.
Tel: O1278 691152
Pair of Brass Car Lamps
A very nice pair of Car Oil Lamps in excellent condition.
No Dings or dents.
Restored by Paul Urquhart, Slinfold Classics well know lamp and brass restorer.
£600 ono
For details please contact Stuart Gray 01462 436093 or mb 07785 258169
Don Bourdon Boilers
Bourdon Boiler Works (BBW) is an experience manufacturer of Stanley boilers with over thirty-five years experience serving the steam car hobby. Quality craftsmanship leading tot eh faithful reproduction of the original style steam boiler is our number one objective. Our design and construction methods are proven as we have built hundreds of boilers, many of which have been in service over twenty years and have logged thousands of miles under the most varied conditions. Please contact us for addition information.
Bourdon Boiler Works constructs on a custom order basis new slotted or drilled vaporizing burners for Stanleys, set-up for the single fuel or two fuel systems. We use original style patterns for the casting for most sizes. We make no compromises on quality. All construction details closely follow original features.
Other selected products and services are available from BBEW, including exhaust feed water heaters, super heaters, steam loops as well as detailed quality and authentic Stanley restorations.
For further information
Don Bourdon,
Bourdon Boiler Works,
P.O. Box 55,
Woodstock,
VT U.S.A.
Phone No: 001 802-457-3787
Email:- bboiler@comcast.net
White Engine
White Engine serial number 0618. Possibly a O or a OO engine.
For Full details please contact Michelle Goddard, Roadsteam Tel 07792136877
Stanley Diff Gear
70 tooth Stanely Diff Gear.
Model 85, 87, 88, 810, 811
POA - to 01884 4253491 or hoth20pwr@btinternet.com
Pressure Tanks
Vintage Steam Products now has pressure tanks for sale! Here is a picture of Don Hoke's, CJ, with two of them.
$394.95 US per pair.
Don sent two to Art Hart and he said that if he did not know differently he’d have thought he made them! High praise indeed.
Vintage Seam Products LLC
Donald Hoke
4431 Allencrest Lane
Dallas
TX 75244-7506
sales@vintagesteamproducts.com
001 972 661 9672
www.vintagesteamproducts.com
Condensing Car Wheel Pullers
- 204C Condensing Car Wheel Puller
Fits Models 740, 750, and SV 252.
Machined from 35,000 psi tensile, grade 4 cast iron. ¾ - 16 fine thread Grade 8 nut.
$109.95
Vintage Seam Products LLC
Donald Hoke
4431 Allencrest Lane
Dallas
TX 75244-7506
sales@vintagesteamproducts.com
001 972 661 9672
www.vintagesteamproducts.com
Winker Glasses
$24.95
- 279 Winker Glasses
These Winker Glasses measure 7/8" in diameter and 1/4" thick. Precision ground to fit your Winker. The required gaskets are 7/8" OD and 5/8" ID. The material has to seal but cannot absorb any oil. The original material was a form of semi-flexible phenolic (.051" thick).
As soon as I source this material, we'll offer gaskets.
Vintage Seam Products LLC
Donald Hoke
4431 Allencrest Lane
Dallas
TX 75244-7506
sales@vintagesteamproducts.com
001 972 661 9672
www.vintagesteamproducts.com
Kwellit Fire Extinguisher - SOLD
Small Kwellit Fire extinguisher, would suit a Loccomobile or similar.
POA - to 01884 4253491 or hoth20pwr@btinternet.com
Traditional Snake Head Horn - SOLD
Brass Snake Head horn suit a medium to large car. Excellent condition tube is perfect.
For details please contact sallyanndod@hotmail.com
Le Testophone Horn - SOLD
Beautiful Le Testophone Horn which plays a number of tunes.
Wanted
Car wanted for Wedding
A fellow steam enthusiast is looking for someone with a steam car who would be willing to take his good lady to the church for their wedding. The event is next year July 24th. It is in Byley which is a small village in Cheshire. The distance is only approx 1.5 miles. The bride requires a lift (and possibly brides maids) to the church only as they are leaving on his traction wagon behind a good friends engine. There will also be approx 4 other engines there so they you be in good company.
The gentleman is more than happy to cover any costs and even transport the car if needed and they will be made more than welcome at the rest of the days events and if they wanted to stay over several people are staying in caravans as the reception is at a farm so very welcome.
Anyone interested please contact Sally-Ann Dod for further details
How to place an Advert
If you would like to advertise on this page or in our Association magazine please contact the Editing Team, see Contacts page for details. You will need to send us a clear and accurate description of your item, a photo if possible, the contact details you wish to appear in the listing and your full contact details for our records.
Main Page --- Contacts --- Membership --- NSCA News --- Events
© The National Steam Car Association Ltd– all rights reserved
